Make + Do! Pom Pom Pin Cushion! March 10 2015
My own personal sewing kit is such a mis-mash. Jars of threads, vintage sewing paraphernalia and pins and needles everywhere! I do love to make a pin cushion if it takes my fancy (we have a very fun watermelon kit in our shop!) and they are a great way of using up beautiful scraps and will organise those wayward pins!
This is an easy peasy guide to making a Pom Pom Pin Cushion... read on!
You will need:
2 x squares of fabric (10cm x 10cm)
4 x Felt balls (ours are felt and you can get them from this great felt and craft ware supplier)
Needle and thread
Stuffing material (use a old fibre cushion or toy filling)
Scissors and Pins
optional: Sewing Machine
1. Pin your squares with their right sides together and sew (machine or hand) around the edge with a 1cm seam. You will need finish approx 4cm before where you started so that you leave a gap. Clip the corners off the square - carful not to cut through your stitching!
2. Turn the square inside out and push the corners out so that they are nice and pointing - a chopstick or knitting needle works perfectly. Take a needle and thread and stitch on your felt balls to each corner. Start from the inside so that the knot on your thread is inside the cushion.
3. Stuff the cushion full of stuffing until its nice and plump. Push it into the corners and give it a squish to make sure the stuffing is even. Using small stitches sew the gap shut.
One cute pin cushion. Why not make one and box it up with some pins and haberdashery bits for a sewing themed present!?
Make + Do! Colour Block Brooches! February 26 2015
I love brooches. Any kind, fabric, vintage, sparkly - you name it and i've probably fashioned a brooch out of it. They are really great little makes, and make a quirky statement... Here is a little tutorial on how to use up scraps from your felt stash and make a textured, cute and colourful brooch.
You will need:
Felt scraps - as many colours as you like, I like to use clashing ones
Wooden shape - I get mine from Ebay or sometimes here (this one is a 5cm heart)
Strong glue - I LOVE, love, love GemTac. You can get it from Fabricland or online. Its super strong and dries clear. I especially love that its designed to stick on rhinestones and diamante to dance wear(!)
Brooch pin - get from most haberdasheries
Paintbrush or Glue spreader
Scissors - small and sharp preferably!
1// Pick the colours of felt you would like to use. Cut into thin strips with nice straight cuts. Make sure when positioned together they have enough area to cover the wooden shape with an overlap.
2// Put glue all over one side of the brooch - don't be too generous as it can seep through the felt.
3// Lay the felt strips one by one over the glue, butting up the next colour against the piece you have stuck down. Make sure they overlap the edges of the wooden shape.
4// Turn the brooch over and trim off all the excess - get it nice and neat.
5// Put some glue on the brooch pin and stick it on the back, leave for a few hours to dry.
Put it on your coat and add a pop of colour on your Parka!!!
P.S if you are in Salisbury on Sunday 1st March we will be making these on our stall at the Salisbury Artisan Market - stop by and make one for only £2!